These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 2 • Saw Teeth: 4
Features:- For connecting cables, modules, and distribution frames- Ideal for impact krone and ratchet type amp modules
For telephone and computer network installation and maintenance. Terminates wire and cuts off excess. Suitable for all CW1308 telecom cable. Cable locking, insertion blades and cable shears included. Features and Benefits • For telephone and computer...
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads...
An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 13 • Overall Length Metric: 48 • Radius 1 Metric: 4
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check...
A gently radiused, flat-bottomed cutter for producing sleek modern draining grooves with effective water disposal. Especially suited to compact laminate worktops.Gentle 2.5mm Radius produces flat bottomed draining grooves for sleek aesthetics and effective...
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 18 • Cut Length Metric: 19 • Overall Length Metric: 57 • Radius 1 Metric: 9
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks....
For door and window construction, decorative panelling and many other joinery applications. Designed for 35mm and 44mm timber thicknesses. Specifications • Shank Diameter: 1/4 • Dia Metric: 36.7 • Cut Length Metric: 9 • Overall...
|
|