These Scan Work Gloves are lightweight and flexible with a close fitting ergonomic design that provides good dexterity for most work tasks. The gloves feature an adjustable hook & loop wrist strap, a printed silicone palm to provide an enhanced grip,...
Trend Craft Pro 1/4in shank straight router cutter - 9/32in diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 7.1mm wide X 19.1mm cutting depth...
Scan White PU Coated Gloves offer lightweight protection with a slightly enhanced gripping power. The 13 gauge polyester liner provides added warmth. The palm has been dipped in polyurethane. Seamless design with a knitted wrist. Conforms to EN 388:2016...
These Scan Grey Polyurethane Coated Gloves are fitted with a 13 gauge, cut 3 resistant, knitted seamless liner. The palms and fingers are coated with polyurethane. They are suitable in cutting environments such as wood and glass, and also suit a laboratory...
These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials...
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications • Shank Diameter: 1/2 • Dia...
These Scan Work Gloves are lightweight and flexible with a close fitting ergonomic design that provides good dexterity for most work tasks. The gloves feature an adjustable hook & loop wrist strap, a printed silicone palm to provide an enhanced grip,...
Trend Craft Pro 1/2in shank Aquamac cutter - 46.3mm diameter Two Flute Carbide tips. Speeds up the fitting of specialist weather seals Schlegel Aquamac 21 or Exitex Aquatex A10 seal. Cuts the correct sized groove and recess in a single pass for increased...
These Scan Grey Polyurethane Coated Gloves are fitted with a 13 gauge, cut 3 resistant, knitted seamless liner. The palms and fingers are coated with polyurethane. They are suitable in cutting environments such as wood and glass, and also suit a laboratory...
These Scan Black PU Coated Gloves are made from knitted nylon with a seamless finish and a fine polyurethane coating over the palm and fingers. The back of the glove is uncoated to provide ventilation to the hand, avoiding perspiration and clamminess....
|
|