For use with the Leigh Dovetail Jig. This cutter has an extra long shank for cutting dovetail pins. Specifications • Shank Diameter: 8 mm • Dia Metric: 8 • Cut Length Metric: 26 • Overall Length Metric: 70
Rigid plastic safety pushstick for guiding small sections of timber over a router or table saw. Keeps operators hands away from the cutting tool. Pushstick must be used when making any cut of less than 300mm in length, or when feeding the last 300mm...
Sawblades designed for a professional finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely...
This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height. They are especially useful for accurate work such as when the router is held inverted in a router table. Suitable for the following TREND T3, T5,...
Threaded inserts for fixings in woods, man-made boards and fibre board e.g MDF. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts need to be located from the underneath. Specifications...
For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. The 40mm machine bit is designed to suit cam and dowel fixings. It is recommended that these bits are used in a drill stand. Specifications...
Honing compound and leather strop to hone chisels and plane irons. 100 gram honing polishing compound. Used to polish sharpened cutting edges to give a highly polished, sharp cutting edge. Contents: 1 x Leather strop 1 x Compound bar
Five piece cutter pack aimed at kitchen fitters. Cutters have TC centre tip. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops....
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications • Dia Metric:...
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications • Dia Metric:...
|
|