A LED which flashes approximately twice a second when a voltage between 3.5V and 14V is connected to them. Within the supply voltage range, no series resistor is required. The LED has a built-in blinking IC and have a blinking frequency from 3Hz to 1.5Hz....
A range of 5mm diameter LEDs from the 12V series in a T-13/4 package. These LEDs are designed to connect across 12Vdc power supply rails. They have a 12V integral current limiting resistor, which means no external current limiter is required with a 12V...
Maplin Sony Npfw50 Equivalent Digital Camera Battery By Inov8
The PIC16F8X fits perfectly in applications ranging from high speed automotive and appliance motor control to low power remote sensors, electronic locks, security devices and smart cards. the FLASH/EEPROM technology makes customisation of application...
A high intensity 52mm red LED cluster housed in a waterproof plastic housing that is suitable for large in or outdoor display applications such as sign or message boards. The cluster comprises of an array of super-bright GaAlAs LEDs and has a maximum...
A very high quality metal film resistor that is physically the same size as the 1W resistor, yet has a superior specification.
A 12V, 8mm panel mounting LED with chrome bezel. The LED is supplied with a washer and locking nut . Has a reverse voltage of 5V, an 8mm diameter drilling hole and a thread size M8x0.75mm.
A range of 2 SCART boxes designed to allow up to 3 devices to be connected to one SCART plug. The cable used is fully screened, 50cm in length and wired as an extension (i.e pin 1 to 1, 2 to 2, 3 to 3 etc).Please note: Contention from 2 or more audio/video...
|
|
