Nickel-plated terminal posts, one with a red and one with a black knob. Each post has a 4mm top socket and a 2.1mm dia. hole in the post. Knob size 16.5 x 12.5mm dia. Fits panels up to 3mm thick. Post shaft requires a 5mm dia. hole.
A high quality wirewound resistor sealed in a high insulation ceramic block. The block is heat and moisture resistant and non-flammable. The resistor is low noise, very stable and has an overload capability of ten times the rated power for 5 seconds.
Product specifications Key Information Type Fuse Features Pack Size 1 Compatibility Suitable For Domestic
The PIC12F675 merge all the advantages of the 12C architecture and the flexibility of FLASH program memory into an 8-pin package. These devices feature a 14-bit instruction set, small package footprint and a wide operating voltage of 2.0 to 5.5 volts....
A new sub-miniature, vertical mounting, linear track preset fully enclosed in a flame retardant plastic housing. The insulated slider can be adjusted from either side by a tool with a blade 1 to 2.3mm wide. Power rating 0..15W at 40\u00B0C. Tolerance...
Fully enclosed general purpose relay available in 4PDT solder tag contact arrangements, with 12Vdc coil. PCB & DIN rail sockets are available.
A range of attractive golf ball bulbs, ideal for use in table lamps, chandeliers and other lighting effects where the bulb may be visible.
Product specifications Key Information Type Switch Pack Size 1
CAUTION: This device generates a visible beam of green light that will not burn or cut. However, it is moderately hazardous and should not be viewed by the naked eye on the same axis as the beam.
|
|
